Plywood Weight & Volume Calculator

Calculate the weight and volume of a plywood order

Use this free calculator to estimate the weight, volume and cost of a plywood or wood-based panel order before you book transport. Enter the material, thickness, sheet size and quantity — the tool converts to m², m³ and kilograms instantly.

Area per sheet–
Volume per sheet–
Weight per sheet–
Total volume–
Total weight–
Sheets per m³–
Estimated price–

Estimates only. Panel density varies by species mix, glue, moisture content and manufacturer — always confirm load weights with your supplier before arranging transport.

How panel weight is calculated

The formula is simple:

Weight (kg) = length (m) × width (m) × thickness (m) × density (kg/m³)

Volume is worked out the same way without the density: volume (m³) = length (m) × width (m) × thickness (m). Multiply by the number of sheets for the totals.

Typical densities of plywood and wood-based panels

PanelTypical density (kg/m³)Weight of one 2440 × 1220 mm sheet at 18 mm
Birch plywood~680~36 kg
Eucalyptus plywood~620~33 kg
Poplar plywood~480~26 kg
Okoumé / marine plywood~480~26 kg
Mixed hardwood / combi plywood~600~32 kg
Film-faced plywood~680~36 kg
Fire-retardant plywood~700~38 kg
Blockboard~500~27 kg
MDF~730~39 kg
HDF~870~47 kg
Chipboard / particle board~660~35 kg
OSB/3~640~34 kg
Melamine-faced board~730~39 kg

Figures are typical trade averages and will differ between manufacturers and products. Ask your supplier for the declared density if you are working to a load limit.

Why weight matters when buying panels

  • Freight is charged on volume or weight — whichever is greater. Dense panels (HDF, MDF, birch plywood) hit weight limits long before they fill a truck, so a "full load" of HDF is usually much heavier than a full load of poplar.
  • Handling and manual limits — an 18 mm 2440 × 1220 mm birch sheet is around 36 kg. A full pallet is typically 1–1.5 tonnes and needs a forklift.
  • Vehicle payload — always check the gross vehicle weight limit against your total order weight, not just the CBM.
  • Container loading — 20ft and 40ft containers cap out on both volume and payload; panel density decides which limit you hit first.
  • Floor and structure loading — for mezzanine, roofing and mobile applications the finished weight of the floor build-up matters.

Worked example: 100 sheets of 18 mm birch plywood

  • Sheet size: 2440 × 1220 mm = 2.9768 m²
  • Volume per sheet: 2.9768 × 0.018 = 0.05358 m³
  • Weight per sheet: 0.05358 × 680 = ~36.4 kg
  • 100 sheets: 5.358 m³ and ~3,644 kg (3.64 tonnes)

At €520 per m³ that is roughly €2,786 of material — but the transport cost will be driven by the 3.6-tonne weight, not just the 5.36 m³.

Related guides

Need a quote for a specific panel?

Tell us the panel, thickness, sheet size and quantity — we quote in EUR within 24 hours.

Request a quote or message us on WhatsApp: +421 918 206 708.