EUDR Compliance Guide for Plywood & Wood Panel Importers

Last updated: October 2026. The EU Deforestation Regulation (EUDR) is now weeks away for large and medium-size companies. If you buy, import or sell plywood and wood-based panels in the EU, this guide explains what applies to you, what you must collect, and how to be ready for 30 December 2026.

What is the EUDR?

The EU Deforestation Regulation (EUDR) is Regulation (EU) 2023/1115. It requires companies placing certain forest-risk commodities — and products derived from them — on the EU market (or exporting them) to show that the goods are deforestation-free and legally produced. It replaces the EU Timber Regulation (EUTR), the previous framework for timber.

It was amended on 19 December 2025 by Regulation (EU) 2025/2650, which delayed the application dates by 12 months and simplified several obligations — notably for “downstream operators”.

Does the EUDR apply to plywood and wood-based panels?

Yes. “Wood” is one of the seven covered commodities, and the product scope (Annex I) lists the wood-based goods under HS Chapter 44, including:

  • Plywood — HS 4412
  • Particle board / chipboard — HS 4410
  • Fibreboard (MDF, HDF) — HS 4411
  • Veneer sheets — HS 4408
  • Densified and other engineered wood — HS 4413
  • Sawn timber and other wood articles — HS 4401–4421

If you import plywood from outside the EU, or buy and resell it inside the EU, you are in scope.

The deadlines (as amended)

WhoApplies from
Large and medium-size operators and traders (non-SME)30 December 2026
Micro and small enterprises handling timber already covered by the EUTR30 December 2026
Micro and small enterprises — other in-scope products30 June 2027

Two important details:

  • Wood placed on the EU market before 30 December 2026 remains governed by the EUTR until 31 December 2029.
  • The EUDR cut-off date is 31 December 2020: “deforestation-free” means the wood was not produced on land subject to deforestation or forest degradation after that date. Wood harvested before 29 June 2023 is exempt from EUDR due diligence.

Know your role: operator, trader or downstream operator

  • Operator — places in-scope products on the EU market or exports them. Must run full due diligence and submit a Due Diligence Statement (DDS).
  • Trader — distributes in-scope products already on the EU market. Lighter obligations: keep records and pass on information.
  • Downstream operator (new category after the 2025 amendment) — produces or trades goods made from materials already placed on the market. Does not submit its own DDS, but must maintain traceability and pass on the upstream DDS reference.

The three-step due diligence system

  1. Information gathering — collect product, supplier and origin data (see checklist below).
  2. Risk assessment — evaluate the risk that the wood is not deforestation-free or not legally produced.
  3. Risk mitigation — if the risk is anything more than negligible, act to reduce it before placing the goods on the market.

The system must be reviewed at least once a year.

What to ask your plywood supplier — a 10-point checklist

  1. Full product description and HS code (e.g. 4412 for plywood).
  2. Country and region where the wood was harvested/produced.
  3. Geolocation of every plot: GPS polygon for plots over 4 ha; a single GPS point for plots of 4 ha or less.
  4. Production or harvest date (after the 31 December 2020 cut-off).
  5. Legality evidence — harvest rights, permits, tax and environmental compliance.
  6. Supplier name, address and contact.
  7. Chain-of-custody / DDS reference from their own upstream supplier.
  8. Species used in the panel.
  9. Whether any recycled material is included (recycled content is exempt from geolocation but must be documented).
  10. Any certification (FSC / PEFC) held along the chain.

Submitting a Due Diligence Statement (DDS)

  • DDSs are filed electronically in the EU’s EUDR information system (accessed through TRACES NT).
  • Each statement returns a reference number and a verification number.
  • The DDS must be available to customs before release for free circulation or export.
  • Keep statements and supporting evidence for at least five years.

Country risk benchmarking

The European Commission classifies countries and regions as low, standard or high risk. For low-risk countries, due diligence is simplified — a full risk assessment may not be required, but you must still show no more than negligible risk and keep your information. Standard and high-risk origins require the full process.

Is FSC or PEFC certification enough?

Certification is strong supporting evidence of legality and sustainable sourcing, but it does not automatically replace an operator’s own due diligence obligations. Treat certificates as one input among several — not a substitute for the DDS.

How MOMARK-SRO supports your EUDR compliance

MOMARK-SRO supplies plywood and wood-based panels in bulk to trade buyers across the European Union. When you request a quote, we can include the documentation you need to build your due diligence file: origin, species, HS codes and chain-of-custody information.

EUDR — frequently asked questions

Does the EUDR apply to plywood?

Yes. Plywood (HS 4412) is explicitly in scope, along with chipboard, MDF/HDF, veneer and other wood-based panels.

What if my plywood was produced before the deadline?

Products placed on the EU market before 30 December 2026 remain subject to the EUTR until 31 December 2029.

Do I need GPS data for plywood?

Yes — the plot geolocation requirement applies to the wood contained in the product. Plywood made from multiple plots requires coordinates for each contributing plot.

Is recycled plywood covered?

Recycled material is exempt from the geolocation requirement, but you must document that it is recycled and meets the legality criteria.

Who submits the Due Diligence Statement?

The operator — the company that first places the product on the EU market or exports it. Downstream operators pass on the upstream DDS reference instead of filing their own.

Get a quote with compliance documentation

Send us your specification and volume — we quote in EUR within 24 hours, with origin and chain-of-custody information on request.

Request a quote or message us on WhatsApp: +421 918 206 708.

Disclaimer: this guide is provided for general information and is not legal advice. Always check the current text of Regulation (EU) 2023/1115 (as amended) and the latest European Commission guidance for your specific situation.